-
Sizes – 3.38 fl. oz. and 8.45 fl. oz.
- Mediums– paper, wood, glass, plastics, metal ceramics and more. Refer to Helmar Adhesives Easy Selection Chart.
- Instructions:
- Always test before use.
- Make sure surfaces to be adhered are clean & dry
- Using a soft brush apply Helmar Crackle Step 1 over the entire surfact to be treated and allow to dry. Helmr Step 1 will remain tacky to touch after drying. Drying time approximately 10-20 minutes.
- Liberally apply Helmar Crackle Step 2 with a soft brush. A little bit of experimenting with the thickness of the coat will be required to create your desired crackle effect.
- Leave to dry overnight.
- To highlight crack wipe the surface with a small amount of ink/linseed oil. Gently wipe away excess color leaving the pigment behind in the cracks.
- Dry Time – Step 1 10-20 minutes. Leave Step 2 to dry overnight.
- Helmar Products are ACMI certified to ensure our products are the safest they can be.
- Type of Jar -Remember to close and tighten after use to avoid drying.
- Where you can purchase it – List of Helmar Preferred Retailers on Blog: www.helmarusa.typepad.com (left side)
- Wholesale retailers contact – info@helmarusa.com
- Tips: Can speed up dry time on Step 1 with heat gun but be careful not to overheat or you will get bubbling. We recommend letting Step 2 air dry. It’s a product you will want to experiment with to find out what else it can do!
