Greetings and Salutations! Jennifer (aka Scraps), here, and I'm pleased as Halloween punch to be sharing my first post as a new member of the Helmar Design Team! Today I'm going to show you how to use Helmar Liquid Scrap Dots to make your own stamped ribbon for a fraction of the cost similar ribbon goes for in stores!
It all started when I saw a spool of artfully tattered Halloween ribbon for sale and thought (as I'm sure many people do) 'I could totally make that.' I've carved stamps from rubber and cork before, and you can cut foam pieces into shapes for stamps too, but I had a hunch that one of my favorite Helmar adhesives–Liquid Scrap Dots–would be perfect for this.
After sketching out my skull shapes onto a piece of cardstock and slipping inside a page protector, I piped the Helmar Liquid Scrap Dots over my images just like I would icing onto a cake and then set them aside for a day to make sure they were good and dry before handling them.
Just as I suspected, the slick plastic of the page protector allowed my piped figures to peel right up and the back of the "stamp" clung easily to acrylic blocks or other spare bits of plastic, like the lid from a storage container wide enough to hold three of my skulls.
For my ribbon I'd hunted up some black canvas in the remnants bin of the fabric store, knowing that they almost always discount those bolt ends 50%, so I got half a yard for less that $5.00. Once torn into 3 1/2"-wide strips (for the nicely tattered edges) and pieced together it came to just over 9 yards. And since I had everything else on hand, this was a very pocketbook-friendly project giving me 3 times the ribbon for less than half the price of one.
Now it was time to stamp! To prevent the acrylic paint from building up around the edges of the stamp, I used a foam brush to apply a coat of paint to the stamps rather than set them into a puddle of paint like a regular stamp. And even though I liked the texture that the right-side-up stamps gave me, after a few repeats I decided a blockier image would be better, so I flipped the shapes over (using a bit of Helmar Quick Dry 450 to adhere them to another spare plastic piece as a base since the "front" isn't as grabby as the flat back sides) and kept on stamping.
The thin coat of acryllic paint dries pretty quickly, so stamping the whole 9 yards didn't take all that long, especially using my ironing board as a long, easily moved work surface. Once the last section had dried I ran both long edges through my sewing machine set on a wide zig-zag, both to add a border to the ribbon as well as keep the subtle fraying from going too far.
Then it was ready to wrap around the staircase railing!
Wishing you creative days,
Helmar Products Used:
Helmar Quick Dry 450
Helmar Liquid Scrap Dots
Other Items Needed:
Cardstock, Pencil, Ruler (or printed clip art)
Page Protector or Acetate Sheet
Black Canvas Fabric
Scissors
Acrylic block or plastic container/lid
Acrylic Paint, Foam Brush
Sewing Machine or Needle & Thread









